ING+1 bodykit for Nissan Fairlady 350z

For more information please visit ING+1

How to Choose a GT Wing

1. Choose the car models

There are a lot of brands and models. For example, please refer to the following table. Also, the tuning cars and such that need to be installed on the outer side of the trunk, or on the side of the fender, are deliberated early on from the stages of molding process. (There may be cases when charges are separately or additionally due.)

Eunos/S2000 / MR-S / DC-2 (Integra) / DC-5 / DB-8 / CR-X CL-1 (Accord, Euro) / CT (Celica) / Z-ZT (Celica) / 180SX / S13 / S14 / S15 / R32 / R33 / R34 / AE86 (4-door, HT) / AE111 / EVO4 / EVO5 / EVO6/ EVO7 / Z33 / FD / FC / JZA80 / JZX100 / NSX / ImprezaGC8 /GDB / EG6 / EK9 /

2. The Wing type

What is considered as the best condition is when the area-wise portion of Wing slightly exceeds beyond that of car’s rear train. Whether to make this proportion between them larger or smaller, simply depend on the Users’ preference or choice of styling. Wings narrower than the maximum width of the car by more than 330mm, is considered to be in conformance with the safety criteria (the Japa nese Standard). Depending on some models however, there could be ones that may NOT come within the said standrange of criteria.

3. The Wing width
For wing width, we use Voltex as a reference

Type II or III is recommended for cars with a rounded rear train.


While for a square rear train, Type IV or V is recommended.


Type I having a 1500mm width is applicable to either (rounded or square). Also, with a Wing having the same width, the types can be determined according to the amount of down force; (greater the down force,) Type III →Type V →Type II →Type I →Type IV.

TRIAL Throttles for 2ZZ

Original throttle	Trial big throttle
Torque values	Torque values
3000rpm 16.5 kgm	3000rpm 17.1 kgm
4000rpm 17.1 kgm	4000rpm 17.8 kgm
5000rpm 16.9 kgm	5000rpm 17.2 kgm
6000rpm 15.6 kgm	6000rpm 15.8 kgm
6800rpm 18.7 kgm	6700rpm 19.3 kgm

Original throttle	Trial big throttle
Maximum Power 181.8 ps	185.8 ps maximum power (up 4 ps!)
Maximum torque 18.7 kgm	19.3 kgm maximum torque (up 0.6 kgm!)

What car is this??? Toyota MR2???

WTH is this? When Toyota MR2 become a 4 doors sedan.

NEW strengthen alternator from TRIAL for 2ZZ

Toyota 2ZZ engine for strengthen alternator is finalized.
Pure 80 Amp, 100 Amp it to the ignition system have been increased, Power UP,improvement in fuel efficiency. Also, the alternator will benefit light intensity lights and electronic goods.

NEW small lightweight engine crankshaft from TRIAL for 2ZZ

Toyota's 2ZZ engine crankshaft pulley is finalized.
Crank pulley is small, lightweight and can reduce the moment of inertia in response to the engine, improving the accelerator response and the high turnover of power to UP.

Greddy Super Charger for Toyota Celica GTS

Toyota Celica (GTS) Greddy Supercharger Kit (11511503)

Increase 81 Horsepower with Greddy Airinx Intake Kit @ 8.5PSI

Greddy MP62 Magna-Charger

440cc Injectors

Cast-Aluminum Intake Manifold

Greddy Billet Pulley Kit

Pre-Programmed Greddy E-Manage Ultimate

Complete Bolt-On Kit

*All Supercharger kit requires professional installation.

Greddy Bolt-On Supercharger Kit :
Chosen vehicles with limited space for modification and vehicles with close-coupled catalytic converters are idea for GReddy supercharging. State-of-the-art Magna-Chargers with internal by-pass minimize drag while fuel tuning is optimized for smooth linear power, with Greddy’s pre-programmed e-manage and hi-flow cast intake manifolds. Included GReddy belt and pulley systems make this a complete bolt-on upgrade.