Short Block for EJ20 and EJ25

JUN Machine Shop has added a new Short Block for Subaru EJ20 and EJ25 engine. Now there are on sale.
These products are simple short cylinder block as base of tuning. The short block has two kinds for your driving stages. The BASIC type was done minimum processing for adjusting uneven quality of factory parts. And, the EX type incorporated special parts and processing recommended by JUN. These are pre-assembled block which was done some required working of adjusting bearings, adjusting gap of piston rings, and assembling pistons, rods, and a crankshaft to a short block.
We prepared reinforced liner kit which was made by Darton as the additional tuning part.

SUBARU EJ20 ENGINE

SPECIFICATION

BASIC TYPE	EX TYPE
- New Subaru OE Block - JUN Piston kit - W-Series (92.0mm) - New Subaru Connedting rod - New Subaru Crank Shaft - New Subaru Main Bearing - P.E. Rod Bearing - Clearance Check and Cleaning - Adjusting Bearings - Adjusting Gap of Piston Rings - Assembling Block and Parts	- New Subaru OE Block - JUN Custom Kit EX 2.2L - JUN Piston Kit C-Series - JUN I-Beam Connecting Rod - JUN Billet Crank Shaft - Cylinder Reinforcement by Rib - New Subaru Main Bearing - P.E. Rod Bearing - Clearance Check and Cleaning - Adjusting Bearings - Adjusting Gap of Piston Rings - Assembling Block and Parts

* Not including seals and plugs of each brands.

Details

NAME	JUN SHORT BLOCK EJ20
VEHICLE	SUBARU IMPREZA WRX
ENGINE	EJ20
TYPE	BASIC TYPE	EX TYPE
BORExSTROKE	92mmx75mm	92.5mmx79mm
ENGINE DISP.	1994cc	2159cc
SALES	on sale

SUBARU EJ25 ENGINE

SPECIFICATION

BASIC TYPE	EX TYPE
- New Subaru OE Block - JUN Piston kit - W-Series (99.5mm) - New Subaru Connedting rod - New Subaru Crank Shaft - New Subaru Main Bearing - P.E. Rod Bearing - Clearance Check and Cleaning - Adjusting Bearings - Adjusting Gap of Piston Rings - Assembling Block and Parts	- New Subaru OE Block - JUN Custom Kit EX Turbo - JUN Piston Kit C-Series - JUN I-Beam Connecting Rod - JUN Billet Crank Shaft - Cylinder Reinforcement by Rib - New Subaru Main Bearing - P.E. Rod Bearing - Clearance Check and Cleaning - Adjusting Bearings - Adjusting Gap of Piston Rings - Assembling Block and Parts

* Not including seals and plugs of each brands.

Details

NAME	JUN SHORT BLOCK EJ25
VEHICLE	SUBARU IMPREZA WRX
ENGINE	EJ25
TYPE	BASIC TYPE	EX TYPE
BORExSTROKE	99.5mmx79mm	100.0mmx79mm
ENGINE DISP.	2457cc	2482cc
OPTIONAL	Inserting reinfoced liner kit
SALES	on sale

For more information, please visit JUN Auto

4B11 2.3L Custom Kit for EvoX

JUN Machine Shop has added a custom kit for Mitsubishi Lancer Evolution X (CZ4A/4B11) engine. Now it is on sale.

This Custom Kit for 4B11 expands engine displacement by enlarged bore and stroker. The engine displacement is 2307cc.

The JUN Custom Kit provides more power and torque capabilities of your Stroker Assemblies - Includes JUN Crankshaft, JUN Piston Kit and JUN Super Connecting rods. The lightweight, high strength, and rate of balance of those parts are improving. The high response is offered. You can use broadly in various fields as circuit running, drag race etc.

NAME	JUN CUSTOM KIT EX 2.3L 4B11
VEHICLE	MITSUBISHI LANCER EVOLUTION X
ENGINE	4B11
BORExSTROKE	87mmx97mm
ENGINE DISP.	2307cc
SALES	on sale
CONTENTS	PISTON KIT, I-BEAM RODS, FORGED CRANK SHAFT, OIL JETS

For more information, please visit JUN Auto

JUN Piston Kit for VQ35DE

JUN Machine Shop has added a Piston Kit for Nissan VQ35DE engine. Now it is on sale.

This Piston Kit adds our product as C-Series which was made by Cosworth. This piston increased compression ratio to 11.7:1*1. This piston is excellent in the reliability and the durability because the piston is manufactured using the same methods as Cosworth Formula One pistons.

NAME	JUN CUSTOM KIT EX 2.3L 4B11
VEHICLE	MITSUBISHI LANCER EVOLUTION X
ENGINE	4B11
BORExSTROKE	87mmx97mm
ENGINE DISP.	2307cc
SALES	on sale
CONTENTS	PISTON KIT, I-BEAM RODS, FORGED CRANK SHAFT, OIL JETS

For more please visit JUN official Website

TechArt GT Street RS

TechArt has unveiled the GT Street RS which is based on the Porsche 911 GT2 where the standard output from the GT2 is at 530 hp (395 kW) and 684 Nm (505 lb-ft).

The tuned GT Street RS able to produce 660 hp, an increase of 130 hp from the standard 911 GT2 and 860 Nm (634 lb-ft ) of torque with the help of modified turbochargers, a sports air filter, modified pressure sensor, larger carbon inlet pipes, customised intercoolers and a sports flap exhaust combined with high-performance headers.

Mean while for exterior, the GT Street RS features with a lots of carbon stuffs. These stuffs including the new front apron with lower carbon splitter, an air duct for better air flow from behind the radiator and out through the carbon outlet vents, aero bonnet, headlight shades, mirror shades GTstreet sill panels, a carbon roof spoiler and a rear apron with carbon diffuser, air outlet and carbon air wings.

More pictures for Mastretta MXT

More pictures for the Mastretta MXT

More on Mastretta MXT

New design for BMW 6 Series from Lumma Design

Recently there is a new body kit for BMW 6 Series. This is called CLR600 and it is from very well known car tuner from Germany, Lumma Design.

The Lumma Design CLR600 kit consists of a front spoiler, side sills, a rear apron bumper with an integrated diffuser, a rear spoiler and a rear wing, dual intake plenums, a carbon fiber air filter housing and a red colored valve cover.

A new exhaust system is fitted to the CLR600 BMW 6 series. Besides that, a reprogrammed ECU and a stiffer suspension system which lowered the car by 35 mm.

Check out WheelHQ.com and their line of BMW Wheels

Konigseder Porsche GT Aero Kit

The Konigseder has produced an aero kit for Porsche GT. Although only 1270 Carrera GT’s were produced, and the production run is well and truely over, Konigseder feels that there is enough demand to create a custom aerodynamic kit. The kit consists of a new pointy front bumper, side skirts, faux air intakes on the roof and a huge rear wing.